¿Quieres ayuda o deseas conocer un poco más acerca de Mil-tek?
Envíanos una email y nos pondremos en contacto contigo en 24 horas.
Convenient operating height
Total height below 1.8m
High compaction pressure
Electric: almost silent running 57 dB (A)
Plug'n'Press: modern control system
Constant Pressure: Locks pressing plate in place
Safe and easy bale ejection system
The Electric E219 is the smallest of the E-series electric balers with a total height of just 1.8m. Even with this low height, a large door opening of almost 1 meter wide allows for the loading of ample amounts of material at an optimal working height.The E219 features the same modern control system as all E-Series machines allowing you to activate the cycle and lock the pressing plate in place. The Stay 'n' Hold feature applies constant pressure without any further use of power.The low height of the E219 makes it extremely flexible for even the most compact of working spaces. Despite this, it has an optimal working height for loading material. The E219 is suitable for cardboard, plastic and other recyclable material, with a bale size of around 50kg (cardboard) and 80kg (plastic).Powered by 3-phase electricity, the E219 operates quietly without interfering with the natural workflow and can be located in hygiene sensitive areas.
Open the top door and start filling the Electric E219 with your waste material. To activate it, simply close the door, and push the button!
An illuminated button will indicate when the baler is ready to bale out. Open the door, tie the bale and use the automatic bale out feature.
Once the bale out has been completed pull the banding through and tie at the base of the baler in the shown area. Close the door, and you are ready to bale again, and again.
The E219 is housed on legs that allow easy transport on a forklift. A Mil-tek Technician will facilitate the installation, which requires a 3-phase electrical connection.
The large size and convenient height of the E219's door opening make it easy to load material into the chamber. The machine can be started manually via the control panel or be set to automatically start when the door closes.
The lower door of the E219 is secured via a lock crank. An automated bale out function makes emptying the baler a simple process.
The spindle rotates, allowing the pressing plate to wind down. This also facilitates locking out the pressing plate (the Stay'n hold feature') without any further use of electricity. The pressing plate has a trapezoid shape to prevent buckling.
Free of hydraulic oil, the E219 runs quietly at 57 dB(A), which is similar or lower than the noise level output of most domestic appliances.
The E219 uses Mil-tek Original 13mm banding, which comes in custom cut 250m rolls designed to suit the machine. If you are at all unsure of what banding you need, just ask your Mil-tek rep.
The banding rolls are housed on top of the machine. Swap one out, and feed the banding through the opening at the top and down the back wall of the chamber. For more detailed instructions, refer to your user manual.
Suitable for both cardboard or plastic, the low height and low physical footprint of the E219 means that it can be installed in tight locations such as storerooms or unpacking areas.
In addition to the low height, the E219 baler has a very low operating noise level of below 58 decibels meaning that it can run in the background without interrupting the normal working environment.
Smaller sized supermarkets, mini markets, convenience stores and general retailers will find an E219 electric baler especially useful.
The small size and convenient height of the E219 baler make it suitable for warehouse and logistics operations and locations that do not already have a source of compressed air.
It is powered by 3-phase electricity without using hydraulics and operates quietly. The wide door opening and optimal loading height mean it can handle medium-sized boxes as well as multiple materials to maximize on-site segregation and recycling.
The E219 baler is suitable for manufacturing facilities or locations that do not already have a source of compressed air.
It is powered by electricity, without using hydraulics and operates quietly complementing the normal workflow. The Model E219 can bale multiple materials, assisting on-site segregation and reducing the carbon footprint
|Peso de la bala||Plastic: <80 kg|
|Cardboard: <50 kg|
|Grado de compresión||85-90%|
|Nivel de ruido||<60 dB (A)|